Honeywell HEN322 4 Series User Manual

Configuring System Settings
133
To export a system configuration
1. Go to Main Menu  SETTING  SYSTEM  IMP/EXP.
2. Insert a USB storage device (such as a USB flash drive) into one of the USB ports on the
NVR. The Find USB device dialog box opens.
Figure 10-19 Find USB Device Window
3. In the Find USB device dialog box, click Config Backup.
4. On the IMP/EXP page, click Refresh. The page populates with the details of the storage
device.
Figure 10-20 Configuration Backup Window
5. Click EXPORT. A message appears confirming that the export was successful and the
system configuration file (named Config_[YYYYMMDDhhmmss]) is added to the file list.
To import a system configuration
1. Insert a USB storage device containing a system configuration file (exported from another
NVR) into one of the USB ports on the NVR. The Find USB device dialog box opens.
2. In the Find USB device dialog box, click CONFIG BACKUP.
3. On the IMP/EXP page, click Refresh to show the contents of the USB device. Select the
configuration file that you want to import (named Config_[YYYYMMDDhhmmss]), and
then click Import.

Honeywell HEN322 4 Series Specifications

General

Brand	Honeywell
Model	HEN322 4 Series
Category	Network Hardware
Language	English