EasyManuals Logo

Honeywell HEN322 4 Series User Manual

Honeywell HEN322 4 Series
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Performance Series Network Video Recorder User Guide
32
Figure 3-8 Expanded PTZ Control Panel
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the NVR, you must configure the PTZ connection
settings.
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.
To configure the PTZ connection settings
1. Go to Main Menu  SETTING  SYSTEM PTZ, the following window is displayed:
Figure 3-9 System Setting – PTZ
2. Configure the following settings:
Channel: Select the channel (camera) for which you want to configure PTZ settings.
PTZ Type: Select Remote for the PTZ type. A remotely connected IP camera is connected
through the network.
3. Click Apply, and then click OK to save your settings and exit.
Configuring PTZ Functions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HEN322 4 Series and is the answer not in the manual?

Honeywell HEN322 4 Series Specifications

General IconGeneral
BrandHoneywell
ModelHEN322 4 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals