Honeywell HEN322 4 Series User Manual

Performance Series Network Video Recorder User Guide
38
Configuring the General Recording Settings
In the RECORD configuration interface, you can do the following:
• Select Auto/Schedule recording for the main and sub streams
• Select Manual recording for the main and sub streams
• Enable and disable the Snapshot function
To configure the general recording settings
1. Go to Main Menu  SETTING  STORAGE  RECORD, the following window is
displayed:
Figure 4-1 Storage Recording Settings
2. On the Record page, select the recording type (Auto, Manual, Stop) that you want to
enable on each channel, for both the main stream and sub stream.
3. Under Snapshot, enable snapshot recording on the desired channels.
4. Click Apply, and then click Save.
Configuring the Video Recording Schedule
To configure the video recording schedule
1. Go to Main Menu  SETTING  STORAGE  SCHEDULE Rec, the following window
is displayed:

Honeywell HEN322 4 Series Specifications

General

Brand	Honeywell
Model	HEN322 4 Series
Category	Network Hardware
Language	English