Honeywell HM512W1005 - 5-year limited warranty

PLUMBING
STEP ONE: Connect the Cold Water Supply
Useonlycoldwater.Donotusehotwatersupply.
Insertoneendofthewaterlineintothewaterlter.
Usethe1/4-inchplasticwaterlineprovidedora
1/4-inchcopperwaterline.Applyamodestpullto
ensureatightt.
Useclampsortiestosecurethewaterlterina
locationthatallowsforremovingandreplacingitin
thefuture.Honeywellrecommendschangingthe
waterlterannually.
Installtheprovidedbackowpreventer,asrequired
bycode.See “Appendix F: Reverse Osmosis Filter”
on page 42 if using the Reverse Osmosis Filter.
Cutthewaterlinesoitislongenoughtoreachfrom
thewaterltertothesupplyttingonthebottom
oftheTrueSTEAM.
InsertthewaterlineintotheTrueSTEAM
supplytting.
STEP TWO: Tap into a Water Line
Consultlocalcodesforproperplumbing.•
Use the saddle valve provided or a T-fitting and •
manualshutoffvalvetotapintoacoldwaterline.
Refertotheliteratureincludedwiththevalveyou•
choseandthelocalplumbingcodes.Useproper
techniqueforthevalve.
M29604
Saddle Valve
T-fitting
Water Supply
Line
Manual Shutoff
Valve
M29605
Water Supply and Drain Connections
TrueSTEAMHumidicationSystem69-2285EF—01
10
4
3
2
1
5