APPENDICES
Setting up the RO Filter
SeetheinstructionsheetpackagedwiththeROFiltrationSystemforcompleteinstallationinstructions.
1. Mount the base chassis to a surface capable
ofholdingupto7poundsbetweenthehome’s
coldwaterlineandtheTrueSTEAMlocation.
(Mountinghardwareisprovided.)
2. Connectthe1/4-inchwhitewaterlinetothe
home’smaincoldwatersupply.Connectthe
otherendtotheinletportonthebasechassis.
3. Connectthe1/4-inchwhitewaterlinetothe
outletonthebasechassis.Connecttheother
endtotheshutoffvalve.Connecttheotherend
totheTrueSTEAMsupplytting.
4. Connecttheyellowwaterlinetotheoutletport
onthecleanwaterstoragetank.Connectthe
otherendtotheyellowinletportontheRO
FilterSystem.
5. Connecttheredtubingtotherejectwaterport
on the base chassis, and to a suitable drain on
theotherend.
IMPORTANT:Refertoandfollowlocalcodes
forproperdraininstallation.Refertoadditional
drain requirements in the TrueSTEAM
installationguidewhencouplingtheROFilter
drainwiththeTrueSTEAMdrain.
Standpipe
Condensate
Pump
Sump Laundry
Tu b
Drain points for reject water
Floor
Drain
Clean Water
Storage Tank
Cold Water Supply
M29642
1/4” White Tubing
Backflow
Preventer
White Tubing
Yellow
Tubing
Red Tubing
5
5
4
4
1
2
2
6
3
3
TrueSTEAMHumidicationSystem69-2285EF—01
43