Honeywell HM512W1005 - STEP FIVE: Reinstall the Tank

OPERATION
AND SERVICE
STEP FIVE: Reinstall the Tank
Beforereinstallingthetankandcover,perform
thesechecks:
Clearanydustfromtheventilationholes •
inthecover.
Clearanydebrisfromthewaterdraintube.•
Makesurethewatertankgasketsealisseated•
properlyintheTrueSTEAMbase.Makesurethe
gasketisingoodcondition(nocracksortears)
beforeattachingthetank.
Attachtankbysecuringthelatchandplug
inTrueSTEAM.
If the control is calling for humidity, the Humidifying
lightwillblinkatstartup.TrueSTEAMwaits5minutes
tocompletethetankreconnectionbeforeactingon
thiscall.
Engagethewhitewatervalvetothetank’sblack
spool,thenturnthemanualshutoffvalvetothe“Lock”
positionandpluginthepowercord.
CheckthatTrueSTEAMisstillmountedlevelandis
securelyinplaceonthemountingbracket.
PresstheGobuttononcethetankiscompletely
reconnected.ThiswillreadyTrueSTEAMtoactonthe
control’scallforhumidity(ifpresent).
M29633
M29628
TrueSTEAMHumidicationSystem69-2285EF—01
28
2
4
3
1