Honeywell HM512W1005 - STEP TWO: Remove the Water Tank

OPERATION
AND SERVICE
STEP TWO: Remove the Water Tank
Makesurethetankisempty.TheEmptylightturnson
whenitis.
Turnthemanualshutoffvalvetothe“Unlock”position.
Gripthewhitewatervalvearmandslideitbackto
disengagefromthetank’sblackspool.
Gripthetankbottomrmly.Pushdownthesafety
releasebuttonandpullthelatchforwardto
releasethetank.
Note:ThelatchremainsattachedtoTrueSTEAMandisnotremoved
withthetank.
M29630
CAUTION: Scalding hazard.
Do not attempt to remove TrueSTEAM from the mounting bracket during operation or when the
tank is full of water. The heating element could be hot when tank is removed. Failure to comply
could result in severe scalding.
TrueSTEAMHumidicationSystem69-2285EF—01
26
2
3
1