Honeywell HM512W1005 - Page 27

OPERATION
AND SERVICE
ThecleaningushcycleisinitiatedwhentheDraining
lightbeginsblinking.Thecyclewilltakeabout
45minutestocomplete.Itwilltakelongerifusing
ROlters.
WhentheEmptylightison,thetankisempty.The
tankmaynowberemovedforcleaningor
otherservice.
M29628
M29629
CAUTION: Scalding hazard.
If you override the cooling action of the flush cycle, the tank will empty immediately, •
regardless of water temperature. Make sure the drain can handle up to 212°F (100°C) if
you do this.
During manual drain, initial water temperature may be above 140°F (60°C).• Scalding water
could splash out of the drain. Use caution when pressing the Drain button.
TrueSTEAMHumidicationSystem69-2285EF—01
25
4
3