Impact / Impact Pro / Impact Pro IR Operating Instructions
12
Neotronics Impact Pro IR Label:
Product Name
Explosion Protection Mark
and Equipment Group
Category
Certified Ambient
Temperature Range
EU Explosive Atmosphere
Symbol and Certification Code
as EN50014:1992
CE Mark - Conforms
to all EC Directives
Identification No. of AT EX
Notified Body
Certification Number
IMPACT GAS DETECTOR
WARNING
Assessment has only been made in the range of 0 to 100%LEL. Use of other ranges
ofammablegasmeasurementonthisinstrumentwillinvalidatethisapproval.
Lumidor Equipment Labels
An explanation of the information on the equipment label is shown below.
CAUTION:
Impact Unit Part No. 2302B2000XXX
Sunrise, Florida
33325, USA
Comms Connection onlytoother certified
Impact detectorsin hazardous area
Read and understand instruction manual before
operatingor servicing
Replace/Recharge batteries onlyin Non Hazardous area
Refer to Manual for battery types
Manufacturers Name and Address
User Cautions
Honeywell Analytics Inc.
Lumidor UL / CSA Certification Label
An explanation of the information on the UL / CSA certification label is shown
below.
Lumidor Impact Pro non-IR Label: Lumidor Impact Pro IR Label:
48X6
only as to intrinsic safety for use in Class I
Groups ABCD hazardous locations
Class I, Groups ABCD Te mp Code T4
Ta mb -20° C < Ta < + 55° C
Warning - Substitution of components
may impair intrinsic safety
C22.2 No. 152
Exia
UL/CSA Approval
User Warning
Product Name
Impact
Gas Detector
R
48X6
only as to intrinsic safety for use in Class I
Groups ABCD hazardous locations
Class I, Groups ABCD Te mp Code T4
Ta mb -20° C < Ta < + 55° C
Warning - Substitution of components
may impair intrinsic safety
UL Approval
User Warning
Product Name
Impact
Gas Detector
R
WARNING
Only the combustible gas detection portion of this instrument has been assessed
by CSA for performance. Furthermore, assessment has only been made in the
0to100%LELscale(catalyticversion).Useofotherrangesofammablegas
measurement on this instrument will invalidate approval.