To Next Page

To Previous Page

31 74-2760—1

Arming System from a Remote Telephone

Arming from a remote telephone will automatically select Mode 1 which will normally

be the “ALWAYS ALL ON” mode.

Disarming the System from Remote Telephone

Disarming disables all standard protection.

What You Do: What You Hear:

Call your home and enter your

remote passcode after the tone

(call a second time after two rings if

you have an answering machine or

answering service).

Welcome:

System is in mode (current number),

enter passcode to disarm.

or, system is ready,

or, system is not ready, try again later,

or, system is in alarm, enter passcode

to disarm,

or, fire alarm, enter passcode to disarm.

If the system is ready:

press

System is armed and okay, mode 1, press

pound “#” to exit.