Honeywell MAXPRO NVR Hybrid XE - Setting up the MAXPRO NVR; Chapter Overview; Setting up the MAXPRO NVR Turnkey Box Solutions; Typical MAXPRO NVR System Diagram

MAXPRO NVR 5.0 Installation and Configuration Guide 47
3
SETTING UP THE MAXPRO NVR
Chapter Overview
This chapter describes the settings for setting up the MAXPRO NVR system.
• For setting up the MAXPRO NVR Single-box solution, see the Setting up the
MAXPRO NVR Turnkey Box Solutions section on page 47.
• For setting up the MAXPRO NVR Software-Only solution, see the Setting up the
MAXPRO NVR Software-Only Solution section on page 52.
• For setting up a peripheral Joystick Controller, see the Connecting the Joystick
Controller section on page 62.
Setting up the MAXPRO NVR Turnkey Box
Solutions
Setting up the MAXPRO NVR unit and client computers is the first phase in the commissioning
process.
Refer to the specific MAXPRO NVR Data Sheet on Honeywell Video web site.
(www.honeywellvideo.com) for information on hardware specifications for the MAXPRO NVR
unit.
Typical MAXPRO NVR System Diagram
The following figure illustrates the MAXPRO NVR SE system diagram.
Figure 3-1 Typical MAXPRO NVR System Diagram