General Procedures
Release 3 34-ST-25-20 MC Toolkit User Manual 29
9/06
Input Calibration (De Transmitters) - Correct Input (Zero), LRV, URV; Reset Corrects
Reset
Corrects
Note:
This function commands
the transmitter to
overwrite all user input
corrections with factory
default
("characterization")
values.
It is intended for use only
when excessive
corrections render the
transmitter inaccurate.
If corrects should not be
overwritten with factory
values, select the
No button.
If corrects need to be
overwritten, select the
Yes
button. The timer will
appear briefly, indicating the
operation is performed.
To Next Page
Loading...