Honeywell Mini-AT User Manual

96
www.honeywell.com
Page 96
Mini-AT User Guide
Item
No. Item Name Description
————————————————————————————————————————
062 SERIAL NUMBER Factory assigned Instrument Serial Number. Example: 09901234
09901234 - disregard the leading zero.
09901234 - 2 digit year of manufacture.
09901234 - 5 digit sequence # during the year of manufacture.
Default = 00000000
063 PCOR MIN PRESS Lowest PCor pressure measured at item 008 since last manual
reset.
Default = 099999.99
064 GAS TEMP MAX Highest temperature measured at item 026 since last manual
reset.
Default = -40.00
065 GAS TEMP MIN Lowest temperature measured at item 026 since last manual
reset.
Default = 099999.99
066 PULSER A LIMIT High limit for the number of pulses accumulated in item 005.
Initiates an alarm (item 069) when exceeded.
Default = 99999999
067 PULSER B LIMIT High limit for the number of pulses accumulated in item 006.
Initiates an alarm (item 070) when exceeded.
Default = 99999999
068 PULSER C LIMIT High limit for the number of pulses accumulated in item 007.
Initiates an alarm (item 071) when exceeded.
Default = 99999999
069 PULSER A ALARM If the value at item 005 (Pulser A) exceeds the Pulser A Limit (item
066), an alarm is initiated. The LCD will display ‘dots’ while in
the Corrector Mode, and item 069 will display “11111111” if view
by the Meter Reader Mode or software. “00000000” is displayed
if item 069 has no alarm.
Default = 00000000
070 PULSER B ALARM If the value at item 006 (Pulser B) exceeds the Pulser B Limit (item
067), an alarm is initiated. The LCD will display ‘dots’ while in
the Corrector Mode, and item 070 will display “11111111” if view
by the Meter Reader Mode or software. “00000000” is displayed
if item 070 has no alarm.
Default = 00000000

Honeywell Mini-AT Specifications

General

Brand	Honeywell
Model	Mini-AT
Category	Controller
Language	English