Honeywell MPA2 User Manual

Installing the MPA2 Panels
System Configuration
MPA2 Access Control Unit Installation Guide, Document 800-25395 - B 53
this case, it is recommended that you request an IP address
reservation from your network provider or administrator. This
address will be needed when the user sets up the Primary
controller. There is a “Manual Registration” button on the EVL
registration screen for this purpose.
6. The Ethernet Switch has not been evaluated by UL.

Honeywell MPA2 Specifications

General

Brand	Honeywell
Model	MPA2
Category	IP Access Controllers
Language	English