Installing the MPA2 Panels
Firmware Specification
MPA2 Access Control Unit Installation Guide, Document 800-25395 - B 59
6.0 Firmware Specification
6.1 Panel Settings
Note: Due to Cyber Security, firmware upgrade /downgrade will be restricted
to just one firmware version. In case of urgency (Rollback), firmware
downgrade will be allowed for a grace period of 30 days only*.
6.2 Firmware Upgrades
Panel Requirements
MPA2 panels must first be upgraded to the latest release firmware version. Refer to the release
notes for more information.
Note: The secondary (downstream) EVL panels should be upgraded first
and then the primary (Primary) panel(s).
For detailed upgrade instructions, refer to the MPA2 User Manual.
* : Future development.
To Next Page
Loading...
