EasyManua.ls Logo

Honeywell MX9 - Bluetooth Indicators

Honeywell MX9
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bluetooth Indicators
The Bluetooth icon state and Bluetooth LED state change as Bluetooth devices are discovered, paired, connected and
disconnected.
There may be audible or visual signals as paired devices re-connect with the MX9.
Taskbar Icon Legend
MX9 is connected to one or more of the targeted Bluetooth device(s).
MX9 is not connected to any Bluetooth device.
MX9 is ready to connect with any Bluetooth device.
MX9 is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX9 Bluetooth scan range, the
Bluetooth connection between the paired device and the MX9 is lost. There may be audible or visual signals as paired
devices disconnect from the MX9.
Bluetooth LED Legend
Blue, blinking slowly Bluetooth is active but not connected to a device.
Blue, blinking medium Bluetooth is paired and connected to a device.
Blue, blinking fast Bluetooth is discovering other Bluetooth devices.
Off Bluetooth hardware has been turned off or does not exist in theMX9.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the MX9 while AppLock is in control.
4-88

Table of Contents

Other manuals for Honeywell MX9

Related product manuals