Accessing the SD Card Slot
Tools required: standard size Phillips screwdriver (customer supplied).
The expansion slots in the MX9 are accessible via the hatch. The hatch can be opened using a standard size screwdriver.
When the hatch is opened, the MX9 automatically shuts down. It is good practice to save any changes then perform an orderly
shutdown to preserve RAM contents before opening the hatch.
When the hatch is open during this procedure, do not remove any cables or allow them to kink.
1. Summit radio card is located in the back half of the MX9 assembly.
2. SIMMcard is located in the front half of the MX9 assembly.
3. SD card is located in the front half of the MX9 assembly.
4-16
To Next Page
Loading...
