Peripherals
Start > Settings > System > Peripherals
This panel is used to enable and disable the touch screen heater and scan window heater, flashlight time delay to Off, and GPS
On/Off.
Settings have no effect if module is not installed.
Factory Default Settings
Heaters
Touch screen heater Enabled
Scan window heater Enabled
Flashlight
Turn flashlight off after 1 minute
GPS
GPS Power On when installed / Off when not installed
Heaters
Note: Settings have no effect if the touch screen / scan window heaters are not installed.
Click the radio button to enable or disable the heaters.
4-107
To Next Page
Loading...
