TCP/IP
The TCP/IP tab contains a checkbox for indicating that TCP/IP parameters are to be obtained from the network DHCP server.
This tab also contains fields for entering a static IP address and the addresses of the primary and secondary DNS servers, if
DHCP and DNS are not used.
Click the checkbox to enable or disable DHCP and/or DNS. When the Use DHCP checkbox is enabled, the static IP address
is disabled. When the Use DNS checkbox is enabled, the DNS address fields are disabled.
If DHCP and DNS are not used, enter the addresses for:
l Static IP Address
l Primary DNS server
l Secondary DNS server
4-123
To Next Page
Loading...
