External Power Supplies
External power supplies are available for the following:
l any I/O cable with a power connector
l desk cradle
l vehicle cradle
l car power adapter (CLA)
l Battery multi-charger
The indoor power supplies (e.g., AC/DC Adapters) use IEC320-C 14 AC power connectors.
The car power adapter uses the cigarette lighter adapter (CLA) and is powered by the vehicle's automotive 12V battery. The
adapter power supply converts the input voltage into a voltage suitable to power the MX9 and charge the unit's internal backup
battery.
The vehicle mount cradle uses a 36V, 24-60V or 70-150V DC-DC power supply.
Note: The MX9 and desk cradle and multi-charger use the same external power supply.
AC/DC 15V Power Supply
The MX9 receives AC/DC power from the AC/DC (15 VDC - 4 Amp - 60 Watt) Power Supply. The MX9 external power
connection is part of the serial cable assembly and the USB cable assembly.
The AC/DC Power Supply is connected to a wall outlet then to the power cable secured to the base of the MX9.
Note: The Honeywell-approved AC Power Adapter is only intended for use in a 25°C (77°F) maximum ambient temperature
environment.
The indoor power supply has a IEC320-C 14 AC power connector.
When the power supply is receiving AC/DC power from the wall outlet, an LED on the power supply illuminates green. The
green LED indicates the power supply is ready for use.
This AC/DC power supply is designated for:
l the MX9 I/O port multi-cables
l the MX9 desktop cradle
l the MX9 battery multi-charger
There are specific DC/DC power supply adapters for the MX9 vehicle cradle; do not use any other power supply with the
vehicle cradle.
1-9
To Next Page
Loading...
