Data Options Tab
Start > Settings > System > Data Collection > Data Options tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the MX9 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
l Defining custom Code IDs
l Disable processing of specified bar code symbologies
l Rejecting bar code data that is too short or too long
l Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l Replacing control characters
l Adding a prefix and a suffix.
Factory Default Settings
Enable Code ID None
MX9 with a Hand Held Products imager MX9 with any other imager/scanner
Note: The HHP Properties button is only present if the MX9 is equipped with a Hand Held products imager.
Choose an option in the Enable Code ID drop-down box: None, AIM, Symbol, HHP or Custom.
6-8
To Next Page
Loading...
