Connections Panel
Beam
Start > Settings > Connections > Beam
Enable or disable receiving OBEX
1
data beams, either by IrDA
2
or Bluetooth.
Note: The MX9 does not support beaming.
The default setting for Beam Settings is Disabled as the MX9 does not support beaming.
1
oBject EXchange - a communications protocol used to exchange information between mobile devices. The device must sup-
port infrared communication.
2
Infrared Data Association. Also used as an abbreviation for the Infrared (IR) port on a mobile device.
4-127
To Next Page
Loading...
