Note: Tap Start > Help for context sensitive Windows Help when changing or viewing options. Tap the X icon in the top right
corner to close Windows Help.
Edit a Network Connection
Double tap the network name to edit the configuration or tap the network name and tap Connect to connect to the network.
Network configuration screens are the same as displayed in the previous section.
Switch Control to SCU
1. To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop down
list on the Main tab.
2. A message appears that a Power Cycle is required to make settings activate properly.
3. Tap OK.
4. Open the Registry panel and click Warmboot.
Radio control is passed to the Summit Client Utility.
9-6
To Next Page
Loading...
