Mixer
Start > Settings > System > Mixer
The MX9 has a speaker located above the scan button. It is active when a headset is not connected to the device.
Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speaker
output.
Headsets can be enabled, disabled and selected using these panels.
Factory Default Settings
Output
Speaker Volume 0.0 dB
Headset Volume 13.5 dB
Headset Unlimited (0 dB)
Input
Input Headset
Record Gain 22.5 dB
Boost + 12.0 dB
Sidetone 0.0 dB
Mixer Panels
Tap and hold the sliders and move them either left or right, or tap the left and right arrows, to adjust decibel levels.
Tap the Test button on the Output panel to hear a changed setting.
4-103
To Next Page
Loading...
