Honeywell MX9 - Data

Data
The Data tab controls when data is transferred between the MX9 and the Mobile Device Server.
Transfer Data When
Device is Idle
When enabled, periodic updates from the Mobile Device Server are postponed until the MX9 has been
idle for the specified period of time. The default is disabled.
Idle timeout
Specify the length of time the device must be idle before a periodic update can run, used when the
parameter above is enabled.
Real-time Statistics When checked, the statistics are transmitted over the network by the Enabler.
Report
Specifies the Report Interval, how frequently the Enabler reports statistics to the Mobile Device
Server.
Retransmit After
Server Contact
Specifies if the device sends statistics to the Mobile Device Server immediately following a con-
nection to the server.
8-10