Parameter Default Explanation
Radio Mode
BG radio:
BG Rates Full
Or
A radio:
BGA Rates Full
Specify 802.11a, 802.11b and/or 802.11g rates when communicating with
the AP. The options displayed for this parameter depend on the type of radio
installed in the mobile device.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54
Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates
preferred)
BGA Rates Full (All B and G rates and all A rates with B and
G rates preferred)
Ad Hoc (when connecting to another client device instead of
an AP)
Default:
BGA Rates Full (for 802.11a/b/g radio)
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this
parameter is set to G rates only, the MX9 may only connect to APs set for G rates and not those set for B and G rates.
The options for the Radio Mode parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration Radio Mode
A Main and BG Main
ABG Rates Full
BGA Rates Full
A Main and A Aux A Rates Only
BG Main and BG Aux
B Rates Only
G Rates Only
BG Rates Full
BG Subset
Contact technical assistance if you have questions about the antenna(s) installed on your MX9.
9-13
To Next Page
Loading...
