To use Sign-On credentials:
l Do not enter a User and Password as the user will be prompted for the Username and Password when connecting to the
network.
To use Stored Credentials:
l Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
l Enter the password.
To use Automatic PAC Provisioning:
l No additional entries are required.
To use manual PAC Provisioning:
l Enter the PAC Filename and PAC Password.
l The PAC file must be copied to the directory specified in the Certs Path global variable. The PAC file must not be read
only.
Tap OK then click the Commit button.
Ensure the correct Active Profile is selected on the Main tab and perform a Suspend/Resume. The SCU Main tab shows the
device is associated after the radio connects to the network.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the \System folder with the PAC
credentials. If the username is changed, that file must be deleted. The filename is autoP.00.pac.
9-41
To Next Page
Loading...
