Honeywell SMV800 - 4.1.1. Differential Pressure sensor calibration

Page 162 SMV800 Modbus User's Guide Revision 1.0
Process
Temperature
LRL
689
Process Temperature Lower
Range Limit
RO
Float
N/A
Flow URV
691
Flow upper range value
RW
float
Flow LRV
693
Flow lower range value
RW
float
Flow URL
695
Flow upper range limit
RW
float
Flow LRL
697
Flow lower range limit
RO
float
DP Damp
699
Damping value for the
Differential Pressure Process
RW
float
SP Damp
701
Damping value for the Static
Pressure Process
RW
float
PT Damp
703
Damping value for the
Process Temperature
RW
float
Flow Damp
705
Damping value for the Flow
output
RW
float
MBT Damp
707
Damping value for the Meter-
body Temperature output
RW
float
Flow Cutoff
Low
709
The lower value for Low
Flow cutoff. When the
flow drops below this value,
the flow output will
be forced to 0.
RW
float
Flow Cutoff
High
711
The upper value for Low
Flow cutoff. The flow
will not exit the low flow
cutoff state (0 flow)
until the flow exceeds this
value.
RW
float
Comm. stress
life
713
Percent of Communication
Module service life spent in
stressful conditions.
Indicates the % of service life
where
one or more of processor
core temperature, or
electronics
temperature are within 10%
of respective range limits.
RO
float
Comm.
service life
715
Percent of the expected
Service Life that the
Communications Module has
been in service. Value is
based on electronics
temperature. Service life
accumulates
faster at higher temperatures
with an exponential
relationship.
RO
float
Communicaito
n Module ET
Min. limit
717
Communications board
Electronics Temperature
(ET) lowest operating limit
from specification.
RO
Float