Honeywell SMV800 - Page 27

Revision 1.0 SMV800 Modbus User's Guide Page 15
User Defined Variable
(User Variable 1 to 8)
LRV
Configure the user defined variable 1 to 8
URV
Value
Enable Limit Monitoring
Read Screen Info
Select Display Screen
Select a Display screen from 1 to 8. The
configuration information for the selected
screen
will then be updated in the menu.
Screen Number
Screen Number selected in the method
above. All other parameters shown in this
menu pertain to the selected screen.
Screen Custom Tag
The custom tag configured for this Screen
Number
Disp High Limit
The value configured as the Display High
Limit for
trending or bar graph
Disp Low Limit
The value configured as the Display Low
Limit for
trending or bar graph
Scaling High
The value configured as the Scaling High
Limit for
PV Scaling selections of linear.
Scaling Low
The value configured as the Scaling Low
Limit for
PV Scaling selections of linear.
Scaling Units
The text configured to be displayed for
custom
Units
Screen Format
The configured selection for the PV Screen
Format
PV Selection
The PV Selection for this screen
Display Units
The PV units selected for this screen
Decimals
The selection for number of decimal places
for the
PV displayed by this screen
PV Scaling
The PV Scaling selection for this screen
Trend Duration
The trend duration selected for this screen
if PV &
trend was configured for screen format.