Honeywell SMV800 - Page 52

Page 40 SMV800 Modbus User's Guide Revision 1.0
Continued …
Primary Element
Type
Orifice ASME-MFC-3-2004 Flange Pressure
Taps
Orifice ASME-MFC-3-2004 Corner Pressure
Taps
Orifice ASME-MFC-3-2004 D and D/2
Pressure Taps
Orifice ISO5167-2003 Flange Pressure Taps
Orifice ISO5167-2003 Corner Pressure Taps
Orifice ISO5167-2003 D and D/2 Pressure
Taps
Orifice GOST 8.586-2005 Flange Pressure
Taps
Orifice GOST 8.586-2005 Corner Pressure
Taps
Orifice GOST 8.586-2005 Three-Radius
Pressure Taps
Orifice AGA3-2003 Flange Pressure Taps
Orifice AGA3-2003 Corner Pressure Taps
Nozzle ASME-MFC-3-2004 ASME Long
Radius Nozzles
Nozzle ASME-MFC-3-2004 Venturi Nozzles
Nozzle ASME-MFC-3-2004 ISA 1932
Nozzles
Nozzle ISO5167-2003 Long Radius Nozzles
Nozzle ISO5167-2003 Venturi Nozzles
Nozzle ISO5167-2003 ISA 1932 Nozzles
Nozzle GOST 8.586-2005 Long Radius
Nozzles
Nozzle GOST 8.586-2005 Venturi Nozzles
Nozzle GOST 8.586-2005 ISA 1932 Nozzles
Venturi ASME-MFC-3-2004 “As-Cast”
Convergent Section
Venturi ASME-MFC-3-2004 Machined
Convergent Section
Venturi ASME-MFC-3-2004 Rough-Welded
Convergent
Section
Venturi ISO5167-2003 “As-Cast” Convergent
Section
Venturi ISO5167-2003 Machined Convergent
Section
Venturi ISO5167-2003 Rough-Welded
Sheet-Iron Convergent Section
Venturi GOST 8.586-2005 Cast Upstream
Cone Part
Venturi GOST 8.586-2005 Machined
Upstream Cone Part
Venturi GOST 8.586-2005 Welded Upstream
Cone Part
made of Sheet Steel
Averaging Pitot Tube
Standard V-Cone with Macrometer method
When Algorithm Options =
Advanced Algorithms