SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
Multifunction Display (MFD) System
5-8
MFD MAP Mode
The MAP mode, shown in Figure 5--3, expands the EHSI map by
increasing the maximum range beyond the normal radar ranges, and
uses all the data available from selectable navigation sources.
AD--58089@
SRP
MFD MAP Mode Display (Example)
Figure 5--3
The MAP mode is selected with the MFD controller MAP/PLAN button
and is always oriented to the aircraft heading with the aircraft position
at lower center and the MAP route moving toward the aircraft.
When coupled to a compatible FMS, the NAV route with up to four
waypoints can be displayed to a range limit of 300, 600, or 1200 miles,
or the next route segment can be displayed. With a compatible NAV
source with a stored data base (i.e., the Honeywell FMS), other
navigation data beyond route mapping such as VOR station locations
and time--to--go to the next waypoint, can be displayed. A movable
designator aids in relocating the next waypoint.
When weather returns are selected, the range is slaved to the weather
radar controller .
To Next Page
Loading...
