SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
5-9
Multifunction Display (MFD) System
The MAP mode displays and annunciators, shown in Figure 5--4, are
described in the following paragraphs.
MFD MAP Mode Symbols
Figure 5--4
D Heading Dial and Lubber Line -- The heading dial indicates the
actual heading of the aircraft with respect to the lubber line. It is the
same heading information as displayed on the EHSI.
D Tuned VOR/DME Symbols -- These symbols are added when the
VOR button on the MFD controller is pushed.
D Desired Track (DTRK) Line -- The waypoints are connected by a
green track line that indicates the desired track from past waypoint
to the next waypoint.
D Selected NAV Source -- The selected long range navigation FMS1
or FMS2 source is displayed as a function of the SRC button on the
MFD controller.
To Next Page
Loading...
