Honeywell SPZ-8000 - 39 Transition to Altitude Hold Mode

SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
8-49
Modes of Operation
The aircraft begins a nonlinear flare, dependent upon vertical speed.
Altitude preselect capture is dropped and altitude hold is automatically
engaged, as shown in Figure 8--39.
AD--58160@
Transition to Altitude Hold Mode
Figure 8--39
The altitude preselect capture submode is cancelled by:
D Moving the ALT set knob
D Moving the pitch wheel on the turn pitch controller
D Any other vertical mode selected on, or captured
D Selecting go--around
D Selecting standby mode
D Coupling to the cross--side EHSI.