SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
Electronic Flight Instrument System (EFIS)
4-52
EHSI MAP MODE WITH FMS SELECTED FOR
DISPLAY
In the MAP mode, when FMS is selected for display, the normal ARC
course select display (pointer, scale, and deviation) is removed and
replaced as described below . Figure 4--38 shows the EHSI in the MAP
mode with the FMS selected for display.
EHSI Map Format -- FMS Selected for Display
Figure 4--38
D A maximum of four FMS waypoints are displayed. The waypoint
identifier is displayed in magenta for the TO waypoint. The flight
level altitude constraint is displayed in cyan next to the waypoint
symbol.
D The FMS legs are displayed as lines connecting each waypoint to
the next one.
D The deviation is displayed as a digital cross--track distance readout.
D If a VOR bearing is selected for display while in an FMS mode, a
cyan NAVAID symbol is displayed with its appropriate number (1 or
2) at its geographic position. If the VOR symbol is out of MAP
range, a cyan bearing pointer is displayed.
D If a VOR bearing is selected for display and the station symbol is
collocated with an FMS waypoint, the waypoint symbol is displayed
with the VOR bearing number to the left in cyan.
To Next Page
Loading...
