Honeywell SPZ-8000 - Go-Around Mode

SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
Modes of Operation
8-52
GO--AROUND MODE
The go--around mode is normally used to transition from an ILS
approach to a climb out condition when a missed approach has
occurred. The pilot selects go--around by pushing the GA button
located on either outboard throttle handle. When go--around is
selected, all flight director modes are cancelled, the autopilot is
disengaged, GA is annunciated on the EADI, and the command cue
indicates a 10 pitch--up wings level command, as shown in Figure
8--40.
AD--58161@
Go--Around Mode
Figure 8--40