SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
5-17
Multifunction Display (MFD) System
Step Procedure
3 On the FMS CDU, the designator position is shown in the
scratch pad at the bottom of the screen. Use the
appropriate line select key to insert this position in the flight
plan. The FMS recomputes the flightpath, and the new
flight plan, shown in Figure 5--13, is displayed.
AD--58097@
33. 3
4:39
0.5L
SRP
Revised Flight Plan Display
Figure 5--13
Changing a Waypoint Procedure
Table 5- -1
To Next Page
Loading...
