EasyManua.ls Logo

Honeywell SPZ-8000 - Page 248

Honeywell SPZ-8000
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
PRIMUS
R
650 Weather Radar System
B--4
3 STAB (Stabilization) Button
Pushing the STAB button toggles attitude stabilization on and off. When
turned off, OFF is annunciated above the button.
4 TGT (Target) Button
Pushing the TGT button toggles the radar target alert feature on and off.
Target alert is selectable in all but the 300--mile range. When selected,
the system monitors beyond the selected range and 7.5 on each side
of the aircraft heading. If a return with target alert characteristics is
detected in the monitored area, the target alert annunciator changes
from the armed condition (T) to the warning condition. (TGT)(Seethe
target alert characteristics in Table B--1 for a target description.) The
TGT annunciator advises the pilot of potentially hazardous targets
directly in front of the aircraft that are outside the selected range. When
a yellow warning is received, the pilot should select longer ranges to
view the questionable target. (Note that target alert is inactive within the
selected range.)
Selecting target alert forces the system to preset gain. Target alert can
be selected only in the weather or flight plan modes.
NOTE: In order to activate the target alert warning, the target must
have the depth and range characteristics described in Table
B--1.
Selected
Range (NM)
Target
Depth (NM)
Target
Range (NM)
5 5 5--55
10 5 10--60
25 5 25--75
50 5 50--100
100 5 100--150
200 5 200--250
300 Inactive -- --
FP (Flight Plan) 5 5--55
Target Alert Characteristics
Table B- -1

Table of Contents

Other manuals for Honeywell SPZ-8000

Related product manuals