Honeywell SPZ-8000 - Page 287

SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
Index
Index--6
Index (cont)
G
Glossary of terms, 7-1
Go-- around mode, 8-52
H
Heading hold mode and wings
level, 8-1
Heading select mode, 8-3
Honeywell product support, 10-1
24--hour exchange/rental support
centers, 10-2
Customer support centers, 10-2
North America, 10-2
Rest of the world, 10-3
Publication ordering information,
10-4
I
Instrument remote controllers, 4-5
functions, 4-5
copilot’s ALT SEL knob, 4-6
CRS select knob and PUSH
DCT button, 4-5
HDG select knob and PUSH
SYNC button, 4-5
pilot’s IAS/MACH knob and
PUSH CHG button, 4-6
TCAS display select switch
(optional), 4-6
Introduction, 1-1
cockpit view, 1-5
equipment list, 1-2
L
LASEREF
R
II/III Inertial Reference
System (IRS), 2-9, A--1
display unit, A--7
inertial reference unit (IRU), A-- 3
introduction, A--1
interface diagram, A--2
LASERTRAK
R
navigation
display unit, A--9
mode select unit), A--4
annunciators, A--5
modes and submodes, A--4
test switch, A--5
power--on/alignment operation,
A--6
Lateral mode problems, 9-3
Lightning sensor system (LSS)
(optional), 2-10
Localizer (NAV) mode, 8-17
track cockpit displays, 8-22
M
MAP mode, 5-8
displays and annunciators, 5-9
flight plan displays, 5-11
Mode select unit, A--4
annunciators, A--5
modes and submodes, A--4
test switch, A--5
Modes of operation, 8-1, 8-2
altitude hold mode, 8-45
altitude preselect mode, 8-46
approach mode, 8-30
track the glideslope beam,
8-34
back course mode, 8-23
Category II approach, 8-38
dual couple approach mode, 8-36
automatic cancellation, 8-37
manual cancellation, 8-37
flight level change mode, 8-42
flight management system (FMS)
steering, 8-14
go--around mode, 8-52
heading hold mode, 8-1
heading select mode, 8-3
localizer (NAV) mode, 8-17
track cockpit displays, 8-22