68 Managing Valve cycle
4 - CONFIGURATION
Figure 48 Dehumidification
Note: The Reheat option is applicable only for 4-pipe dual coil. Aux Heat for Reheat is applicable for both 4-
pipe single coil and 2-pipe single coil.
3. The dehumidification icon appears on Home screen.
Managing Valve cycle
Valve Cycle function is used to periodically cycle valve every 24 hours to minimize
risk of sticking/binding.
To configure valve cycle
1. Swipe left from the Home screen.
2. On the Quick access screen, tap > Equipment > Valve Cycle.
The Valve Cycle screen appears.
To Next Page
Loading...
Need help?
General
