Configuring sensors 59
CONFIGURING SENSORS
Figure 37 Discard message
5. Tap YES or DISCARD as per the requirement.
6. A confirmation message appears, tap YES to confirm.
Configuring sensors
Thermostat supports Sylk sensors and Control sensors (temperature and humidity
only). In order to ensure proper operation and control, configure for Sylk devices only
when using Honeywell compatible sensors.
To configure sensors
1. Swipe left from the Home screen.
2. On the Quick access screen, tap > Equipment > Sensor Settings.
The Sensor Settings screen appears.
Figure 38 Sensor settings
3. Tap Sensors.
The Sensors screen appears.
To Next Page
Loading...
