Reset to default 91
RESET TO DEFAULT
Figure 80 Inactive display
8. Tap Display Off to set the display off. However, the ring LED breaths to show the system
mode. Or, tap Always On to show both display and ring LED. Or, tap Always Off to keep
both ring LED and display off.
Reset to default
User can reset the entire thermostat to the factory default or reset only temperature
setpoints and schedule to factory default.
To reset the factory default setting
1. Swipe left from the Home screen.
2. On the Quick access screen, tap > Reset to default.
The Reset to Default screen appears.
Figure 81 Reset to default
3. Tap Reset Weekly Schedule & Setpoint to only reset the temperature and schedule
setpoint. It retains other configurations.
4. Tap Reset All to fully reset the thermostat. It deletes all the configurations and user data.
5. Tap Restart Device to restart the device without deleting any data.
To Next Page
Loading...
