User management 85
USER MANAGEMENT
User management
The TC300 supports four kinds of user identities as identified in Table 27 with limited
privileges as noted. Except for the Installer role these privileges can be reduced in
the user settings menu.
Passcode rules
All the user accounts are passcode protected. When creating the passcode, follow
the passcode rules given below.
• Passcode length must be between 4 to 12 characters
• Do not use spaces
• Do not use the same passcode used for other users (across all user types)
• If no passcode is entered for basic or Admin, the thermostat will remain at the highest level
of access, installer, and will not require a passcode for access.
Configuring the user roles
To configure user management
1. Swipe left from the Home screen.
2. On the Quick access screen, tap > User Management.
The User Management screen appears.
Table 27: User roles and permissions
Visitor Basic User Admin Installer
System Mode
Override
View Alarm
Temperature Units
Fan Speed Configuration
Brightness
Schedule
Setpoint
Basic Configuration
System Mode
Advanced Configuration
To Next Page
Loading...
Need help?
General
