Boot-up the thermostat 35
BOOT-UP THE THERMOSTAT
Boot-up the thermostat
The thermostat will be powered up automatically after it mounted on the wallplate.
You will navigate through the settings given below subsequently while setting up the
thermostat.
Assigning a name to the thermostat
Connecting to network
Selecting a temperature unit
Setting Date and Time
Setting up the Equipment type
Setting up the System switch
Configuring the Schedule
Setting up the Installer Passcode
Configuring the Service Info
To set up the thermostat
1. Boot-up the thermostat.
The Honeywell logo screen appears, followed by the “Welcome to TC300” screen.
Figure 4 Welcome screens
The Welcome screen followed by the LET’S BEGIN screen appears.
To Next Page
Loading...
Need help?
General
