Honeywell TC300 User Manual

Boot-up the thermostat 37
BOOT-UP THE THERMOSTAT
Connecting to network
Figure 7 Connection
6. If no connection is required, tap SKIP or tap the right arrow button.
If connection is required, the connection screen appears.
Figure 8 Connection
7. Tap BACnet MS/TP and enable the MSTP connection. See Managing connection.
8. Tap Modbus and enable the Modbus connection. See Managing connection.
The General screen appears.

Honeywell TC300 Specifications

General

Brand	Honeywell
Model	TC300
Category	Thermostat
Language	English