Thor VM1A Vehicle-Mounted Computer 15
Power Mode
Select the desired power mode behavior.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Power Mode.
3. Choose one of the following options:
•AC/DC
• Auto-On
• Ignition Control
•UPS
4. Select Power Schedule for Sleep and Shutdown.
AC/DC
The computer is turned On and Off manually by the user using the power button on
the front of the device.
Ignition Control
The computer is turned On automatically when a signal is received via the Ignition
Input wire, which is part of the DC Power Cable.
Auto-On
The computer automatically powers up when power is provided. Auto-On is recom-
mended when the VM1A is powered by AC. The computer will automatically power
up after a power outage.
UPS
The computer is turned On or Off manually by the user using the power button on
the front of the device. The computer will shutdown automatically after one hour of
inactivity.
Power Schedule
Set the duration of time to put the VM1A into Sleep Mode or Shutdown.
Note: The device will sleep or shutdown after the timeout of inactivity.
To Next Page
Loading...
Need help?
General
