Thor VM1A Vehicle-Mounted Computer 9
7. Reattach the access panel, torque the M3 screws to 4-5 inch pounds using a
#2 Phillips bit.
8. When the computer is attached to external power, the UPS battery is
automatically reconnected.
9. Press the Power button to turn on the computer.
Replace the UPS Battery
The UPS battery in the VM1A is field replaceable. Should the UPS battery fail, it can
easily be replaced to minimize downtime.
Equipment Required
The following equipment is user-supplied:
• Torque tool capable of measuring inch pounds
• #2 Phillips screwdriver bit
Replacement Procedure
1. Place the VM1A on a clean, well-lit surface before performing the UPS battery
replacement.
2. Press and hold the Power button until the options menu appears. Tap Power
Off.
3. Remove the computer from the dock.
4.
Disconnect the UPS Battery.
Caution: Before replacing the Thor VM1A front panel, Disconnect the UPS
Battery
.
To Next Page
Loading...
Need help?
General
