5 - 30
Keymap
A key or combination of keys can be remapped to provide a single keypress or a string of keypresses.
Assign settings by clicking radio buttons and selecting keys from the drop down boxes.
Tap the OK button to save changes and exit the Programmable Keys control panel.
Tap the Cancel button to discard any changes and exit the Programmable Keys control panel.
Tap the Restore Defaults to return all Programmable Keys to their default values and exit the Programmable Keys
control panel.
Remap a Key to a Single Key
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select the value for the remapped key from the Remapped Key pull-down list.
4. Click OK to save the result and close the control panel.
Remap a Key to a Unicode Value
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Unicode from the Remapped Key pull-down list.
4. There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the text box
to the right of ALT + and the Unicode character is displayed in the box to the right of =.
5. Click OK to save the result and close the control panel.
Remap a Key to a Key Sequence
Up to 16 keys may be specified for the key sequence. The sequence can consist of keys and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Key Sequence from the Remapped Key pull-down list.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
