Honeywell Thor VM3 Manual

5 - 39
SSD State Monitor
(Start) > All Apps > Windows System > Control Panel > SSD Monitor (Large or Small Icon View)
Use this option to view statistics for the SSD drive(s) installed.
For each attribute, the current, worst, threshold and data values are displayed. The status is also displayed.
If there is more than one SSD installed, there is a tab for each drive.
Tap the Settings button to set the frequency the automatically update data for the SSD drive(s). The default is 1 hour.
Tablet PC Settings (Touch Screen Calibration)
(Start) > All Apps > Windows System > Control Panel > Tablet PC Settings (Large or Small Icon View)
The Thor VM3 uses the HIDeGalaxTouch touch screen driver. The Calibrate... button on this control panel is not used.
Instead use the HIDeGalaxTouch utility, see Touch Screen Calibration (page 5-42) for information on calibrating the touch
screen. The PCAP touch screen is calibrated at the factory and does not use the calibration utility.
User Accounts
Note: The following applies to a Thor VM3 that is not part of a domain. When the Thor VM3 is part of a domain, the user
is prompted for credentials at Windows startup or log on.
The Thor VM3 is pre-configured with an administrator account named Administrator. By default, the Thor VM3 automati-
cally logs onto the Administrator account at Windows startup.
If the user assigns a password to the Administrator account:
• The password is stored and used when the Thor VM3 logs onto the Administrator account at Windows startup. The user
is not prompted to enter a password.
• If the user logs off, the password must be manually entered to log back onto the Thor VM3.
• At the logon prompt, the user could specify a different user account (and password, if necessary) to log on, assuming the
account has been added to the Thor VM3.
• When the Thor VM3 is restarted, the Administrator account automatically becomes the active user account, regardless
of the active account before the restart.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g