Honeywell Thor VM3 Manual

5 - 44
Using PXE Boot to Load an Operating System
The Thor VM3 supports PXE boot. The following are required for PXE boot:
• A server containing the installation files.
• A wired connection from the server to the Thor VM3.
• An external keyboard connected to the Thor VM3.
The Thor VM3 supports UFE mode PXE boot.
To Use UFE Mode PXE Boot:
1. Start the Thor VM3.
2. When the Press F2 for System Utilities prompt is displayed at power up, press the P2 key on the Thor VM3 or the
F2 key on an external keyboard to enter BIOS setup.
3. Select the Main tab on the BIOS screen.
4. Set Network Stack to Enabled.
5. Select the Boot tab in the BIOS.
6. Set PCI LAN first in the boot priority list.
Note: Rather than change the boot order in the BIOS, press F5 as the Thor VM3 boots and use the menu
presented to select PCI LAN as the boot device. After this boot up, the Thor VM3 returns to the default boot
device shown in the BIOS.
7. Select the Exit tab in the BIOS.
8. Choose Exit Saving Changes and press enter.
9. The Thor VM3 reboots and the OS load process begins.
10. Follow any on-screen prompts to select and load the desired OS.
11. The Thor VM3 first tried an IPv4 connection to the server. If that fails, the Thor VM3 tries an IPv6 connection to
the server.
12. If the server is not found, the Thor VM3 proceeds to the next device in the boot priority list.

Honeywell Thor VM3 Specifications

General

Stepping	D0
Tjunction	-40 °C
FSB Parity	No
Processor code	SR1X8
Processor cache	1 MB
Processor cores	2
Processor model	E3826
System bus rate	- GT/s
Processor family	Intel Atom®
Processor codename	Bay Trail
Processor frequency	1.46 GHz
Processor cache type	L2
Processor manufacturer	Intel
Processor package size	25 x 27 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor operating modes	32-bit, 64-bit
Graphics & IMC lithography	22 nm
PCI Express configurations	1x1, 1x4, 2x1
Thermal Design Power (TDP)	7 W
Internal memory	4 GB
Internal memory type	DDR3-SDRAM
Storage media	Flash
Compatible memory cards	-
Internal storage capacity	64 GB
Display diagonal	12.1 \
Display brightness	900 cd/m²
Display resolution	1024 x 768 pixels
Graphics card	HD Graphics
Rear camera resolution (numeric)	- MP
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
HDMI ports quantity	0
USB 2.0 ports quantity	1
I/O ports	1x CAN-bus, RF
Processor ARK ID	78477
Processor socket	BGA 1170
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Platform	Windows
Bundled software	Data Collection Engine, Microsoft Internet Explorer, Microsoft on-screen keyboard, Configuration Cloning Utility, Screen Blanking, Zoom Zone, Launcher
Operating system installed	Windows 7
AC adapter input voltage	90 - 240 V
Battery capacity	- mAh
Battery life (max)	0.5 h
Certification	EN 55024:2010, MIL-STD-810F, SAE-J1455, CCX
Device type	Tablet PC
Form factor	Slate
Product color	Grey, Silver
Protection features	Shock resistant, Vibration proof, Water resistant
International Protection (IP) code	IP66
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	62 mm
Width	318 mm
Height	260 mm
Weight	3000 g