What to do if my HORNER EXL6 0 EXL6 OCS will not download project file?
If your HORNER Control Panel EXL6 OCS won't download the project file, ensure that the project file is saved as a .pgm file and not a .csp file. In addition, to download the file, the file's I/O configuration must match the EXL6 configuration.
How to establish communication to the target controller with HORNER EXL6 0?
To establish communication to the target controller in HORNER Control Panel, verify the controller's node ID and ensure the Target setting matches it. Also, confirm that the local connection is established.
Why is Cscape unable to access the COM port of the PC for my HORNER EXL6 0?
To resolve the issue of Cscape being unable to access the COM port of your PC, note that Cscape might be configured for a COM port that is either not present or is already being controlled by another program. Also, only one Cscape window can access a port at a time; subsequent instances of Cscape opened will indicate No Port.
What to do if my HORNER Control Panel EXL6 OCS does not read media card?
If your HORNER Control Panel EXL6 OCS does not read the media card, the media card should be formatted with the EXL6 OCS.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER EXL6 0 Control Panel controller?
If Cscape has accessed a PC COM port but is not communicating with the HORNER Control Panel controller, the controller is not physically connected.
What to do for an unknown communication error with HORNER Control Panel?
To resolve an unknown communication error with your HORNER Control Panel, close Cscape, power cycle the controller, and reopen Cscape with a blank project. Check Local.
General| Input Voltage | 24 VDC |
|---|---|
| Display | 7 inch TFT LCD |
| Resolution | 800 x 480 |
| Touchscreen | Yes |
| Communication Ports | Ethernet, USB, RS-232/485 |
| Power Supply | 24 VDC |
| I/O | Digital and Analog I/O options |
| Programming | Cscape |
To Next Page
